Autopia Forums - Auto Detailing & Car Care Discussion Forum
Go Back   Autopia Forums - Auto Detailing & Car Care Discussion Forum > Professional Auto Detailing > Start your own auto detailing business
Start your own auto detailing business Learn what it takes to make your detailing business a success! This section covers all aspects of what you should know to start your own detailing business.

» Car Care Brands
Reply
 
Thread Tools Display Modes
  (#1) Old
Japy is starting to get a good reputation around here.
 
Starting Business - 04-18-2006, 07:03 AM

Ok so I've been reading these forums for a few months and now I'm finally to the point where I will be opening my own business soon. I am having trouble figuring out some pricing for certain services and I have no idea whats involved in the weekly maintanance(sp) that some of you talk about, could anyone possibly enlighten me on the subject?

My current pricing is low, I'm a "detailer" at the dealership right now but I mostly do body shop cleanups, or bodyshop details (focusing more on either interior or exterior) or (or cleaning up the car so it looks like it was never in a shop in the first place) so as of right now I dont have a wheel/polisher yet.

My prices for the first like 10 customers is 75$ for a car, and 90$ for a truck, and I'm going to try and upsell adding rain-x to all the windows and mirrors of the vehicle for 15-20$ extra.

Basically I would like input on my pricing as of yet (untill i get more experience with doing my own details and not those of a dealership) and what exactly is the procedure for weekly maint stuff and the pricing for it.

Any help is greatly appreciated and thanks in advance.
   
Reply With Quote
  (#2) Old
Don't shop at Wal-Mart
jdoria would be a good candidate for mayor of Autopiaforums.com.
 
Re: Starting Business - 04-18-2006, 07:22 AM

Make a proper business plan. without one you have a extremely small chance to survive. If you write one you will know what you have to charge for services. This is the same for any business.
   
Reply With Quote
  (#3) Old
Japy is starting to get a good reputation around here.
 
Re: Starting Business - 04-18-2006, 08:40 AM

well I am writing a business plan, I've taken some econ classes so I know about that, but what exactly do you guys do for weekly maintenance. Is it like a quick clean up? or what?
   
Reply With Quote
  (#4) Old
jaybs02 Can Make Rust Shinejaybs02 Can Make Rust Shinejaybs02 Can Make Rust Shinejaybs02 Can Make Rust Shinejaybs02 Can Make Rust Shinejaybs02 Can Make Rust Shinejaybs02 Can Make Rust Shinejaybs02 Can Make Rust Shinejaybs02 Can Make Rust Shinejaybs02 Can Make Rust Shine
 
jaybs02's Avatar
 
Re: Starting Business - 04-18-2006, 09:14 AM

Japy, good luck on your business venture.
One of the things that may help with your pricing question is if others members knew where you were from.

Location plays a big part in a pricing structure.

"J"
   
Reply With Quote
  (#5) Old
Japy is starting to get a good reputation around here.
 
Re: Starting Business - 04-18-2006, 09:26 AM

good point, I forgot to setup my profile to indicate where I'm from.

I am located in michigan, near the lansing area, most specifically in the town of Williamston (small city outside lansing about 30 mins away) but the city is full of old "rich" people (not trying to sound cocky when I say rich)

Again thanks for the help, just tryin to figure things out and get the ball rolling since its april and I've been slacking.
   
Reply With Quote
  (#6) Old
nyc_medic would be a good candidate for mayor of Autopiaforums.com.
 
Re: Starting Business - 04-18-2006, 09:55 AM

I would say that you should do some homework, and go around to other detailing shops and see what they are charging this way you know if your prices are too low or too high. Look at your location and see what is the going price.
   
Reply With Quote
  (#7) Old
Mike
CalgaryDetail Can Make Rust ShineCalgaryDetail Can Make Rust ShineCalgaryDetail Can Make Rust ShineCalgaryDetail Can Make Rust ShineCalgaryDetail Can Make Rust Shine
 
CalgaryDetail's Avatar
 
Re: Starting Business - 04-18-2006, 11:15 AM

I would go out an invest in a book. I know shocking in this day and age howver there is nothing better on the topic of starting a buisness. i would recomened one of starting a buisness and one on a buisiness plan. Tkae the time to figure out exactly what you need to dothen go for it


06 Nissan Altima 3.5SE
   
Reply With Quote
  (#8) Old
Don't shop at Wal-Mart
jdoria would be a good candidate for mayor of Autopiaforums.com.
 
Re: Starting Business - 04-18-2006, 11:39 AM

Quote:
Originally Posted by CalgaryDetail
I would go out an invest in a book. I know shocking in this day and age howver there is nothing better on the topic of starting a buisness. i would recomened one of starting a buisness and one on a buisiness plan. Tkae the time to figure out exactly what you need to dothen go for it
We are brothers!

Hail, the power of education!
   
Reply With Quote
  (#9) Old
Mike
CalgaryDetail Can Make Rust ShineCalgaryDetail Can Make Rust ShineCalgaryDetail Can Make Rust ShineCalgaryDetail Can Make Rust ShineCalgaryDetail Can Make Rust Shine
 
CalgaryDetail's Avatar
 
Re: Starting Business - 04-18-2006, 11:42 AM

lol does it show im a college student. Lol i love learning love educationg and learning (wow im a lsoer jk.) im sure you do to.And what a pefect topic for learning. Making money on somthing you love like detailing. I think im going to e-mail the dean and get him to start a class lol (dont we all wish)


06 Nissan Altima 3.5SE
   
Reply With Quote
  (#10) Old
AutoBuff is starting to get a good reputation around here.
 
Re: Starting Business - 04-20-2006, 02:24 PM

Japy,

as nyc_medic, go and check out what other shops in your area are charging and if you are able to see what type of work they do and ask them how long it takes for certain jobs.

The pricing will have many factors, the main one being your setup. If you have a shop prices may be abit more than mobile due to rent, and the type of products you use. If you are going mobile than you most likely will have higher prices for smaller jobs such as interior cleans and exterior wash, than local shops.

Also do a few full details, a wax, a clay/wax and see how long it takes you for each and how much work it is and that will help you decide on pricing. Some of my prices are less and some or more than other shops, because I feel certain jobs are worth a certain amount.

Hope that helps you out abit

Cheers
Chris
   
Reply With Quote
  (#11) Old
GLEN22
glen22 would be a good candidate for mayor of Autopiaforums.com.
 
glen22's Avatar
 
Re: Starting Business - 04-20-2006, 03:01 PM

I noticed by adding rainx you plan to upcharge 15.00-20.00 bucks,that sounds like alot of money to put rainx on the windows. Like many have said call around and see what competition is and do a better job . good luck
   
Reply With Quote
  (#12) Old
Crazy1 is starting to get a good reputation around here.
 
Crazy1's Avatar
 
Re: Starting Business - 04-20-2006, 04:39 PM

Quote:
Originally Posted by nyc_medic
I would say that you should do some homework, and go around to other detailing shops and see what they are charging this way you know if your prices are too low or too high. Look at your location and see what is the going price.
I Agree!
   
Reply With Quote
  (#13) Old
sneek is very helpful and well-respected.
 
sneek's Avatar
 
Re: Starting Business - 04-20-2006, 06:21 PM

CalgaryDetail are you a student at MRC?

also i want to get a meguiars detailing class going but i need more people !
   
Reply With Quote
  (#14) Old
Mike
CalgaryDetail Can Make Rust ShineCalgaryDetail Can Make Rust ShineCalgaryDetail Can Make Rust ShineCalgaryDetail Can Make Rust ShineCalgaryDetail Can Make Rust Shine
 
CalgaryDetail's Avatar
 
Re: Starting Business - 04-21-2006, 06:51 PM

yes i sure am i love it. Im actullling looking at finsihing a degree in enterpise there. I love mrs i have only good things to say. as far as the megs detailing i would be more thenhappy to sign up. I could also probley get maybe 5 people if i tried. Lets me know if oyu can get it. Also how many people do you need?

on a side note i would like to talk to u a littl emroe personlay about u starting up a buinsess and what market you after.


06 Nissan Altima 3.5SE
   
Reply With Quote
  (#15) Old
aka PEI Detail
Brenton Can Make Rust ShineBrenton Can Make Rust ShineBrenton Can Make Rust ShineBrenton Can Make Rust ShineBrenton Can Make Rust ShineBrenton Can Make Rust Shine
 
Brenton's Avatar
 
Re: Starting Business - 04-21-2006, 07:11 PM

Quote:
Originally Posted by glen22
I noticed by adding rainx you plan to upcharge 15.00-20.00 bucks,that sounds like alot of money to put rainx on the windows. Like many have said call around and see what competition is and do a better job . good luck
Yeah, ditto on the mystery shopper thing.
brenton


Brenton Dickieson
   
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes


» Autopia Forums Sponsor
» Current Poll
What type of machine polisher do you use the most?
I don't use a machine polisher - 6.47%
9 Votes
Random Orbital Dual Action Polisher (Porter Cable, Griot's, Meguiars G110v2) - 61.15%
85 Votes
Forced Rotation Dual Action Polisher (Flex 3401, Makita BO6040) - 14.39%
20 Votes
Rotary Polisher (FLEX PE 14-2-150, Makita 9227c, DeWalt 849W) - 17.99%
25 Votes
Total Votes: 139
You may not vote on this poll.
Powered by vBadvanced CMPS v3.2.1


3.8.7
vBulletin Skin developed by: vBStyles.com
Copyright ©, 2002-2011, AutopiaForums.com - All Rights Reserved


Search Engine Optimization by vBSEO 3.6.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71