Autopia Forums - Auto Detailing & Car Care Discussion Forum
Go Back   Autopia Forums - Auto Detailing & Car Care Discussion Forum > Autopia Forums Members Club > Off Topic > Poorboysworld Forum
Poorboysworld Forum Poorboys products are easy on/easy off, have the right amount of cleaners and protectants to leave an easy-to-maintain vehicle. Not much money, but what a shine!

» Car Care Brands
Reply
 
Thread Tools Display Modes
  (#1) Old
Founder Poorboy's World
Poorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust Shine
 
Poorboy's Avatar
 
Thumbs up **NEW** Custom VC pads for the FLEX - 02-19-2010, 02:45 PM

Poorboy's World is proud to announce the introduction of our custom made Variable Contact (VC) pads exclusively designed for Poorboy's World & the FLEX. They have a molded back to perfectly fit the 5.5" FLEX backing plate!! The molded back will prevent the backing plate from ever getting near your finish. The front is smooth with a slight cup to help prevent or reduce sling. A perfect and centered pad every time. They come in Orange (light cut) , White (polishing),
Black (Finessing) , & Red (Finishing).
Attached Images
File Type: jpg IMG_1809.JPG (474.4 KB, 11 views)
File Type: jpg IMG_1811.JPG (486.9 KB, 6 views)
File Type: jpg IMG_1814.JPG (357.7 KB, 7 views)
File Type: jpg IMG_1816.JPG (430.4 KB, 7 views)
File Type: jpg IMG_1817.JPG (493.3 KB, 4 views)


life is short ..do it while you can

e-mail .. poorboy@poorboysworld.com
   
Reply With Quote
  (#2) Old
Acrylic Paint Conditioner
Gus-Gus Can Make Rust ShineGus-Gus Can Make Rust ShineGus-Gus Can Make Rust ShineGus-Gus Can Make Rust ShineGus-Gus Can Make Rust ShineGus-Gus Can Make Rust Shine
 
Gus-Gus's Avatar
 
Re: **NEW** Custom VC pads for the FLEX - 02-19-2010, 03:08 PM

MMMMMM Flex and new pads........ how does one get ahold of those to "test" them out?


"One day you will have to stop being a Muppet...So take the hand out of yer butt and walk for yourself."

Claying does not mean "High end". It means quality/caring. So would actually learning a trade instead of "Hey I can wash and wax a car, so I'ma gonna be a detailer."
   
Reply With Quote
  (#3) Old
Founder Poorboy's World
Poorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust Shine
 
Poorboy's Avatar
 
Re: **NEW** Custom VC pads for the FLEX - 02-19-2010, 03:13 PM

Quote:
Originally Posted by Gus-Gus View Post
MMMMMM Flex and new pads........ how does one get ahold of those to "test" them out?
for the moment you will need to e-mail or pm me for orders, but they are the same pricing as our larger VC pads, so they can be ordered on line and then follow with an e-mail or pm so that we place the Flex Pads in


life is short ..do it while you can

e-mail .. poorboy@poorboysworld.com
   
Reply With Quote
  (#4) Old
a.k.a. Troy@DetailCity
ArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust Shine
 
ArmstrongDetailing's Avatar
 
Re: **NEW** Custom VC pads for the FLEX - 02-19-2010, 03:46 PM

They look like winners to me.


-
Troy Armstrong

www.protektyourcar.com
   
Reply With Quote
  (#5) Old
Founder Poorboy's World
Poorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust Shine
 
Poorboy's Avatar
 
Re: **NEW** Custom VC pads for the FLEX - 02-19-2010, 03:58 PM

Quote:
Originally Posted by ArmstrongDetailing View Post
They look like winners to me.

Just trying to listen to our customers needs and wants


life is short ..do it while you can

e-mail .. poorboy@poorboysworld.com
   
Reply With Quote
  (#6) Old
a.k.a. Troy@DetailCity
ArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust ShineArmstrongDetailing Can Make Rust Shine
 
ArmstrongDetailing's Avatar
 
Re: **NEW** Custom VC pads for the FLEX - 02-19-2010, 04:37 PM

Quote:
Originally Posted by Poorboy View Post
Just trying to listen to our customers needs and wants
You do that and you're gonna end up like Autogeek.


-
Troy Armstrong

www.protektyourcar.com
   
Reply With Quote
  (#7) Old
Wax Waster
Ronkh Can Make Rust ShineRonkh Can Make Rust ShineRonkh Can Make Rust ShineRonkh Can Make Rust ShineRonkh Can Make Rust ShineRonkh Can Make Rust ShineRonkh Can Make Rust ShineRonkh Can Make Rust ShineRonkh Can Make Rust ShineRonkh Can Make Rust ShineRonkh Can Make Rust Shine
 
Ronkh's Avatar
 
Re: **NEW** Custom VC pads for the FLEX - 02-19-2010, 05:39 PM

Looks like I gotta move an ambulance next week.


Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It's good to be da King !!!
   
Reply With Quote
  (#8) Old
Detailing Gnosis
Bunky Can Make Rust ShineBunky Can Make Rust ShineBunky Can Make Rust ShineBunky Can Make Rust ShineBunky Can Make Rust ShineBunky Can Make Rust ShineBunky Can Make Rust ShineBunky Can Make Rust Shine
 
Bunky's Avatar
 
Re: **NEW** Custom VC pads for the FLEX - 02-19-2010, 06:08 PM

What is the outside diameter?



Al
The Need to Bead

   
Reply With Quote
  (#9) Old
sullysdetailing is an incredible help to Autopiaforums.com members!sullysdetailing is an incredible help to Autopiaforums.com members!
 
sullysdetailing's Avatar
 
Re: **NEW** Custom VC pads for the FLEX - 02-19-2010, 06:31 PM

Niceeee



Shawn
(954) 871-0205
   
Reply With Quote
  (#10) Old
Founder Poorboy's World
Poorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust Shine
 
Poorboy's Avatar
 
Re: **NEW** Custom VC pads for the FLEX - 02-19-2010, 07:29 PM

Quote:
Originally Posted by ArmstrongDetailing View Post
You do that and you're gonna end up like Autogeek.
I don't think so

Quote:
Originally Posted by Ronkh View Post
Looks like I gotta move an ambulance next week.

or we can move the fork lift

Quote:
Originally Posted by Bunky View Post
What is the outside diameter?
I believe it is 6.5"


Quote:
Originally Posted by sullysdetailing View Post
Niceeee


life is short ..do it while you can

e-mail .. poorboy@poorboysworld.com
   
Reply With Quote
  (#11) Old
Detail time!
budman3 Can Make Rust Shinebudman3 Can Make Rust Shinebudman3 Can Make Rust Shinebudman3 Can Make Rust Shinebudman3 Can Make Rust Shinebudman3 Can Make Rust Shinebudman3 Can Make Rust Shinebudman3 Can Make Rust Shinebudman3 Can Make Rust Shine
 
budman3's Avatar
 
Re: **NEW** Custom VC pads for the FLEX - 02-20-2010, 09:05 PM

Wow, awesome! That is about all that I can think of right now. And, its about time . Definitely gonna have to pick up a bunch of these!


"Whether you think you can or think you can't - you are right " -Henry Ford
   
Reply With Quote
  (#12) Old
Founder Poorboy's World
Poorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust Shine
 
Poorboy's Avatar
 
Re: **NEW** Custom VC pads for the FLEX - 02-22-2010, 09:13 AM

Quote:
Originally Posted by budman3 View Post
Wow, awesome! That is about all that I can think of right now. And, its about time . Definitely gonna have to pick up a bunch of these!
Kevin they are nice, but there must be other things on your mind


life is short ..do it while you can

e-mail .. poorboy@poorboysworld.com
   
Reply With Quote
  (#13) Old
Founder Poorboy's World
Poorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust ShinePoorboy Can Make Rust Shine
 
Poorboy's Avatar
 
Re: **NEW** Custom VC pads for the FLEX - 03-13-2010, 02:19 PM

They are now in stock and listed on our site ... poorboysworld.com


life is short ..do it while you can

e-mail .. poorboy@poorboysworld.com
   
Reply With Quote
  (#14) Old
Detailing Gnosis
Bunky Can Make Rust ShineBunky Can Make Rust ShineBunky Can Make Rust ShineBunky Can Make Rust ShineBunky Can Make Rust ShineBunky Can Make Rust ShineBunky Can Make Rust ShineBunky Can Make Rust Shine
 
Bunky's Avatar
 
Re: **NEW** Custom VC pads for the FLEX - 04-10-2010, 08:56 AM

I got to see some of these pads at Detail Fest.

It has the interesting feature where it is concave in the normal state then flattens when pressed against the paint and wraps around the backing plate for extra protection. The hole in the center is to help center it.






Al
The Need to Bead

   
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cleaning Pads with the Flex 3401 and the Grit Guard Universal Pad Washer Mike Phillips The Detail Institute presented by Autopia-CarCare.com 5 01-23-2010 09:08 AM
Where are the flat pads? Tex Star Detail Paint Correction and Gloss Enhancement 6 02-20-2009 07:54 AM
Pads for a Flex DA? CharlesW Paint Correction and Gloss Enhancement 2 10-18-2008 05:29 PM

» Autopia Forums Sponsor
» Current Poll
What type of machine polisher do you use the most?
I don't use a machine polisher - 7.69%
11 Votes
Random Orbital Dual Action Polisher (Porter Cable, Griot's, Meguiars G110v2) - 60.14%
86 Votes
Forced Rotation Dual Action Polisher (Flex 3401, Makita BO6040) - 13.99%
20 Votes
Rotary Polisher (FLEX PE 14-2-150, Makita 9227c, DeWalt 849W) - 18.18%
26 Votes
Total Votes: 143
You may not vote on this poll.
Powered by vBadvanced CMPS v3.2.1


3.8.7
vBulletin Skin developed by: vBStyles.com
Copyright ©, 2002-2011, AutopiaForums.com - All Rights Reserved


Search Engine Optimization by vBSEO 3.6.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71