F10 BMW brand new delievered with waterspots damaged - restored and protected with opti coat by Detailiens
Getting new car always comes with bundle of joy & excitements
My buddy, contacted me to protect his investment a couple of weeks ago prior collecting his brand new car, and we specifically mentioned not to be wash by road side car wash
on his way home driving thru some highway under construction and pilling
splashes of `Wet` boring* spillage (drilling fluids) splattered the under wheel wells and lower side of the car
so pls flush off instantly...to avoid hard to removed mud like stains....with Alien cleandrilling fluid systems usually consist components of a kerosene-like
petroleum base density compound.
this is not an easy task to remove especially when is left unattended few days but with Alien clean effortlessly
we always begin by a good good washing
cleaning the electronic damper control carefully
more cleaning
more cleaning required
anti rust drips
spray on brush off & rinse away with OPC
before
after alienised
a weeks old wheels
closer
closer
immerse amount of dust accumulated and not easy to clean but..............................
after a simple bath - with OPC
before
after a good bath before opti coat
rims exterior before
after
moving to side steps area...
removing dirt trapped in between by Opti clean
center console cleaning make easier with OPTI Clean
cleaning the fuel filler area
a newly fitted universal Diesel filler adapter cap for all petrol station (as many comes with difference size of pump nozzle)
moving in
to clean the rest with the effortless Optimum Opti clean
example
before
after OOC
++++++++++++++++++++++++++++++++++++++++
after a good good bath - we further prepare the paint surface decontamination - follow by inspection as paint need to be carefully studied and measured prior correction
this enable a quick assessment of the quality of the paint finish and to verify the clear coat is not endangered or too much of clear coat being removed during paint leveling / over excessively
we discover some deep water spots etching on the paint
closer
MIKE PHILLIPSThe most important thing a person can do is to find out what caused the problem and then try to avoid it into the future because you cannot continue to compound a thin, hard factory finish as you`ll go through the clear and expose the basecoat.
another water spots etch
Bookmarks